Runner RUN 2011/T-PC – a compact rehabilitation medical treadmill of Italian manufacture (Runner Srl), designed for gait recovery and functional loads in orthopedics, neurology, and sports medicine. The basic configuration is supplied without handrails, and the necessary equipment (handrails, underarm kit, safety system) can be added as needed, making the treadmill easy to adapt to the specific tasks of a particular office.

Brand: RUNNER

Made in: Italy

Official distributor

12-month warranty

Free shipping

Service and maintenance

Control is performed via a 10.1-inch touch screen based on an embedded computer with Linux OS. The treadmill smoothly adjusts speed from 0.1 to 20 km/h and incline from 0 to +22%. The 2 HP AC motor is designed for patients weighing up to 150 kg. For more complex cases, additional options are available: negative incline, extended and adjustable handrails, underarm kit, fall protection system with a vest, and ramp.

The device features an opto-isolated RS232/USB interface with Trackmaster protocol, allowing it to be connected to ECG systems from leading manufacturers, including Schiller, Cosmed, Fukuda, Edan, Ergoline, BTL, Norav, Nasiff, Philips (STBDi), and others. It is also compatible with Polar chest pulse sensors.

Self-centering and self-lubricating belt reduce maintenance costs, while the cushioned deck reduces stress on the joints. For safety, there is an emergency stop button and an emergency shutdown cord with a magnet. The device complies with the EU Medical Devices Regulation MDR 2017/745 and has CE marking.

Standard Equipment:

wheels for mobility;
service tool;
power cable;
USB cable.

Options for Additional Equipment:

incline from −3% to +19%;
extended handrails;
underarm kit;
adjustable front and side handrails;
mounting for safety system for extended handrails;
bracket with vest for fall protection;
ramp.

RUN 2011/T-PC

Manufacturer: Runner Srl (Italy)

Control Screen: 10.1″ touch, resistive

Computer: PC iMX6 DL, 1 GB, Micro SD 8 GB, Linux OS

Speed: 0.1 – 20.0 km/h

Speed Change Step: 0.1 km/h

Incline Angle: 0% – +22%

Incline Change Step: 0.5 – 1%

Working Surface of the Belt: 140 × 48 cm

Motor: 2 HP AC

Inverter: Single-phase, 230 V, 1.5 kW

Transformer: T1700 VA

Power Supply: 220–240 V AC, 50/60 Hz, 10 A

Auxiliary Incline Circuit: 18 V AC

Auxiliary Console Circuit: 12 V AC

Power Consumption (max speed): 2000 VA

Rated Power Consumption: 1500 VA

Noise Level: < 70 dB(A)

Maximum Patient Weight: 150 kg

ECG Connection Interface: RS232/USB, opto-isolated, Trackmaster protocol

Pulse Sensors: Compatibility with Polar® H7, H9, H10 (BLE); sensor not included

Dimensions (W × L × H): 70 × 198 × 142 cm

Weight: 145 kg

Compliance with Standards: MDR 2017/745, CE marking

The treadmill is intended for use by medical personnel as prescribed and under the supervision of a physician. Main areas of application:

gait recovery after orthopedic injuries and surgeries (fractures of the lower limbs, joint arthroplasty, spinal interventions);
neurorehabilitation and walking training in neurological disorders (aftereffects of stroke, traumatic brain and spinal cord injuries, etc.);
balance, coordination, and endurance training, fall prevention (using optional handrails and safety system);
cardiac rehabilitation with heart rate monitoring;
load ECG tests when connected to a compatible ECG system;
recovery of athletes after injuries and assessment of physical performance.

Contraindications are determined by a physician. These include, among others, acute myocardial infarction, unstable angina, decompensated heart failure, severe uncontrolled arrhythmias, acute infectious diseases, and unstable fractures.

Maximum patient weight for the treadmill: 150 kg.

10.1″ touch screen: convenient control of speed, incline, and training modes.
Wide load range: speed up to 20 km/h, incline up to +22%, smooth adjustment in steps of 0.1 km/h.
Negative incline (option): from −3%, for descent training.
Flexible configuration: extended and adjustable handrails, underarm kit, and ramp added as needed.
Compatibility with ECG systems: opto-isolated RS232/USB interface and Trackmaster protocol, remote control of speed and incline possible.
Two control modes: manual and remote.
Compatibility with Polar pulse sensors (H7, H9, H10) for heart rate monitoring during workouts.
Cushioned deck softens impact during stepping and reduces stress on joints.
Self-centering and self-lubricating belt: less maintenance and longer service life.
Safety: emergency stop button, emergency shutdown cord with magnet, optional fall protection system.
Quiet operation: noise level below 70 dB(A).
Mobility: wheels for movement between offices.
Compliance with MDR 2017/745 and CE marking.