Medical treadmill Runner RUN 2011/TR Orthopedic-PC – a rehabilitation medical treadmill of Italian manufacture, designed for gait recovery and functional loads in orthopedics, neurology, and sports medicine.

Brand: RUNNER

Made in: Italy

Official distributor

12-month warranty

Free shipping

Service and maintenance

Control is performed via a 10.1-inch touchscreen based on an embedded computer with Linux OS.

The treadmill smoothly adjusts the speed from 0.1 to 20 km/h and the incline from 0 to +22%. The standard equipment includes extended handrails, an underarm kit, and a removable adjustable seat, allowing the patient to train safely and rest if needed. For more complex cases, additional options are available: negative incline, adjustable front and side handrails, a fall protection system with a vest, and a ramp.

The device features an opto-isolated RS232/USB interface with Trackmaster protocol, allowing it to be connected to ECG systems from leading manufacturers, including Schiller, Cosmed, Fukuda, Edan, Ergoline, BTL, Norav, Nasiff, Philips (STBDi), and others. Compatibility with Polar chest pulse sensors is also provided.

Self-centering and self-lubricating of the belt reduce maintenance costs, while the cushioned deck decreases joint stress. For safety, there is an emergency stop button and an emergency shutdown cord with a magnet. The device meets the requirements of the EU Regulation on medical devices MDR 2017/745 and has CE marking.

Standard equipment:
- extended handrails;
- underarm kit;
- removable adjustable seat;
- service tool;
- power cable;
- USB cable;
- wheels for mobility.

Possibility of additional equipment:
- incline from −3% to +19%;
- adjustable front and side handrails;
- attachment for the safety system for extended handrails;
- fall protection system with a vest;
- ramp.

RUN 2011/TR Orthopedic-PC

Manufacturer: Runner Srl (Italy)

Control screen: 10.1″ touch, resistive

Computer: PC iMX6 DL, 1 GB, Micro SD 8 GB, OS Linux

Speed: 0.1 – 20.0 km/h

Speed change step: 0.1 km/h

Incline angle: 0% – +22%

Incline change step: 0.5 – 1%

Working surface of the belt: 140 × 48 cm

Motor: 2 HP AC

Inverter: Single-phase, 230 V, 1.5 kW

Transformer: 1700 VA

Power supply: 220–240 V AC, 50/60 Hz, 10 A

Auxiliary incline circuit: 18 V AC

Auxiliary console circuit: 12 V DC

Power consumption (max speed): 2000 VA

Rated power consumption: 1500 VA

Noise level: < 70 dB(A)

Maximum patient weight: 150 kg

ECG connection interface: RS232/USB, opto-isolated, Trackmaster protocol

Pulse sensors: Compatibility with Polar® H7, H9, H10 (BLE); sensor not included

Dimensions (W × L × H): 70 × 198 × 142 cm

Weight: 145 kg

Compliance with standards: MDR 2017/745, CE marking

The treadmill is intended for use by medical personnel as prescribed and under the supervision of a physician. Main areas of application:

gait recovery after orthopedic injuries and surgeries (fractures of the lower limbs, joint arthroplasty, spinal interventions);
neurorehabilitation and walking training in neurological disorders (consequences of stroke, injuries to the brain and spinal cord, etc.);
balance, coordination, and endurance training, fall prevention in elderly patients;
cardiac rehabilitation with heart rate monitoring;
exercise ECG tests when connected to a compatible ECG system;
recovery of athletes after injuries and assessment of physical performance.

Contraindications are determined by a physician. These include, in particular, acute myocardial infarction, unstable angina, decompensated heart failure, severe uncontrolled arrhythmias, acute infectious diseases, and unstable fractures.

Maximum patient weight for the treadmill: 150 kg.

10.1″ touch screen: convenient control of speed, incline, and training modes.
Extended handrails, underarm kit, and removable seat: support and safety for the patient during rehabilitation.
Wide load range: speed up to 20 km/h, incline up to +22%, smooth adjustments in steps of 0.1 km/h.
Negative incline (option): from −3%, for descent training.
Compatibility with ECG systems: opto-isolated RS232/USB interface and Trackmaster protocol, possible remote control of speed and incline.
Compatibility with Polar pulse sensors (H7, H9, H10) for heart rate monitoring during sessions.
Cushioned deck softens impact during stepping and reduces stress on joints.
Self-centering and self-lubricating of the belt: less maintenance and longer service life.
Safety: emergency stop button, emergency shutdown cord with a magnet, optional fall protection system.
Quiet operation: noise level below 70 dB(A).
Mobility: wheels for moving between rooms.
Compliance with MDR 2017/745 and CE marking.